Sila Seal Enhance
Price range: $90.00 through $270.00
SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System
SilaSeal Enhance is a ready to apply, and enhancer for aggregate concrete and concrete pavers
- Darkens mortar and enhances stone in aggregate concrete based materials
- Provides superior water repellence
- Reduces efflorescence
- High wear resistance, long life
- UV stable
- Water based
- Non-film forming, allows breathability
- Fungal and algal resistance
- Does not peel or blister
- Can be applied to a damp/wet surface
- Suitable on both horizontal and vertical surfaces
- Can be spray applied
- Aggregate concrete based materials
SilaSeal Enhance is a ready to apply, and enhancer for aggregate concrete and concrete pavers
Read the product information before application.
- The surface to be treated should be clean and free of all contaminants.
- The surface can be damp or wet, however SilaSeal Enhance should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.
- Do not apply SilaSeal Enhance if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30oC. If necessary, cool the surface with water prior to application.
- SilaSeal Enhance is ready to apply and should be mixed well before use.
- A test prior to application must be performed to assess the suitability of the product.
- SilaSeal Enhance may be applied using a saturated brush, roller, paint pad or a low-pressure hand sprayer. The surface should be uniformly applied to saturation point.
- Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.
- Additional coats of SilaSeal Enhance may be applied to achieve the desired effect. Recoat time minimum 2 hours. For recoat, the sealer can be applied as per the first coat. Ensure uniform coverage. Excess sealer must be removed before drying.
- Any overspray on adjacent surfaces such as glass, metal or painted surfaces should be wiped clean with a damp rag before the sealer dries.
- Full curing may take up to 3 days. Avoid traffic for at least 24 hours.
- Equipment clean up can be performed with water.
Additional information
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Size | 5L RTU, 20L RTU |
IMPORTANT! Freight Pick ups are Wednesday and Friday from 1:00pm to 4:00pm
If you need your order urgently, please contact us
How to Apply
Developed in Australian to suit our unique conditions, see our full range or use this chart to help choose which sealer is right for the job.
Preparation
- Clean the surface then rinse thoroughly
- Sealer can be applied to a damp surface
- Free of visible or pooled water, broom off or use a blower to remove
- Surface needs to be touch dry
Sealer Dilution
>>> Always add water to the concentrated sealer!
Step One
Add 5 L concentrate to 20 L bucket.
Step Two
Add 15 L of water.
Step Two
Drill mix or lid & shake ~30 sec.
Sealer Application
- Working from the furthest point, begin spraying the sealer while walking backwards
- Sealer should be sprayed in an even flood coat at a rate of approximately 5m2 per litre – depending on porosity
- Sealer should remain wet on the surface for at least 5 minutes
- Only one flood coat is required, however if the surface is very porous, additional sealer can be applied
- Avoid over spraying sealer on surrounding surfaces.
Application to dense, smooth or non textured surfaces
- A microfiber mop or similar is required to spread the sealer after the initial light spray
- A second application may be required if the surface still accepts sealer
- The surface should be buffed or wiped dry with the mop after each application.
Excess Sealer
- Any sealer that is still present on the surface after 10 to 12 minutes will need to be removed.
- This can be done by brooming out or blowing off pooling.
- While it is safe to walk on wet sealer, care should be taken to minimise footprints.
Simple Guidelines
- Don’t apply if pools of water present
- Don’t apply to hot surfaces (>30 degC), mist with water to cool
- Don’t allow sealer to pool, remove excess
- Avoid contacting surfaces not meant to being sealed
- Don’t apply if rain expected in at least 24 hours
Maintenace
- Cleaning of sealed surfaces recommended every 12 months with NPH Cleaner
- Harsh chemicals: acids, alkalines, solvents will effect sealer longevity
- Minimal pressure required
- Contaminants/dirt will be close to surface
- Time to reapply? – NO STRIPPING REQUIRED