IMPORTANT! Freight Pick ups are Wednesday and Friday from 1:00pm to 4:00pm. If you need your order urgently, please contact us
IMPORTANT! Freight Pick ups are Wednesday and Friday from 1:00pm to 4:00pm. If you need your order urgently, please contact us
KMSi Seal – Water Based Penetrative Sealer

KMSi Seal – Water Based Penetrative Sealer

$65.00

KMSi Seal – Water Based Penetrative Sealer

$65.00
KMSi Seal – Water Based Penetrative Sealer KMSi Seal – Water Based Penetrative Sealer KMSi Seal – Water Based Penetrative Sealer KMSi Seal – Water Based Penetrative Sealer KMSi Seal – Water Based Penetrative Sealer
KMSi Seal – Water Based Penetrative Sealer
KMSi Seal – Water Based Penetrative Sealer
KMSi Seal – Water Based Penetrative Sealer
KMSi Seal – Water Based Penetrative Sealer
KMSi Seal – Water Based Penetrative Sealer

KMSi Seal – Water Based Penetrative Sealer

$65.00
LIMITED TIME OFFER 00
days 00
hours 00
minutes 00
seconds

The price of this item will revert back to $784.00 at the end of this countdown.

Size

5L 20L 5L Concentrate 20L Concentrate (4 x 5L)

Products will be delivered between 1 and 5.
0 LEFT IN STOCK
Product description

SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System

KMSi Seal is a water based siliconate sealer, used for sealing all types of porous limestone and concrete building materials. Suitable for limestone and concrete retaining walls and plain grey concrete. Not recommended for decorative concrete and other coloured materials.

Key advantages

  • Superior water repellence, providing excellent water based stain resistance
  • Reduces water ingress and minimises efflorescence in mineral substrates
  • Transparent, natural finish - does not significantly change appearance
  • High penetration into masonry surfaces
  • High wear resistance, UV stable, long life
  • Fungal and algal resistance
  • Easy to clean surfaces
  • Substrates remain breathable
  • Can be applied to damp or wet substrates

Read the product information before application.

  • The surface to be treated should be clean and free of all contaminants.
  • The surface can be damp or wet, however KMSi Seal should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.
  • Do not apply KMSi Seal if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application.
  • KMSi Seal is ready to apply and should be mixed well before use.
  • A test prior to application must be performed to assess the suitability of the product.
  • KMSi Seal is best applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point.
  • Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying.
  • Protect adjacent surfaces such as glass, metal or painted surfaces from any overspray.
  • Full curing may take up to 24 hours. Avoid traffic for at least 24 hours.
  • Equipment clean up can be performed with water.
Previous Product Next Product
Please Read in Conjuction with Product Label

How to Apply

  • Clean the surface then rinse thoroughly
  • Sealer can be applied to a damp surfaceFree of visible or pooled water, broom off or use a blower to removeSurface needs to be touch dry

Always add water to the concentrated sealer!
Click here to view the steps

  • Working from the furthest point, begin spraying the sealer while walking backwards
  • Sealer should be sprayed in an even flood coat at a rate of approximately 5m2 per litre – depending on porosity
  • Sealer should remain wet on the surface for at least 5 minutes
  • Only one flood coat is required, however if the surface is very porous, additional sealer can be applied
  • Avoid over spraying sealer on surrounding surfaces.
  • A microfiber mop or similar is required to spread the sealer after the initial light spray
  • A second application may be required if the surface still accepts sealer
  • The surface should be buffed or wiped dry with the mop after each application.
  • A microfiber mop or similar is required to spread the sealer after the initial light spray
  • A second application may be required if the surface still accepts sealer
  • The surface should be buffed or wiped dry with the mop after each application.
  • Don’t apply if pools of water present
  • Don’t apply to hot surfaces (>30 degC), mist with water to cool
  • Don’t allow sealer to pool, remove excess
  • Avoid contacting surfaces not meant to being sealed
  • Don’t apply if rain expected in at least 24 hours
  • Cleaning of sealed surfaces recommended every 12 months with NPH CleanerHarsh chemicals: acids, alkalines, solvents will effect sealer longevity
  • Minimal pressure requiredContaminants/dirt will be close to surface
  • Time to reapply? – NO STRIPPING REQUIRED

Where to buy SiF Sealers

We have Resellers across Australia and in New Zealand. Check out your nearest Reseller here!

See Resellers

How to Choose

Not sure which SiF Product is right for you? Check out our handy diagram or get in touch

How to Choose

People often buy

+
Total price: $65.00

Designed and developed by BoosterTheme™