SilaSeal Enhance: Color-Enriching Water Repellent Sealer

Bring out the natural beauty of your masonry with SilaSeal Enhance.This professional-grade, water-based penetrating sealer provides the same industrial water repellency as our standard formula but with an added color-enhancing effect.It penetrates deep into stone, brick, and pavers to enrich their natural tones and provide a "wet look" finish without the shine or slipperiness of a film-forming sealer.The UV-stable, breathable formula creates a powerful hydrophobic barrier that protects against water ingress and efflorescence while making your outdoor spaces look vibrant and refreshed.

Coverage

2 – 25 m2/L depending on surface porosity

Function

High water based stain resistance Low oil based stain resistance

Substrates

Decorative concrete, natural stone, travertine, sandstone, granite

Effects

Excellent Water Beading

Key Advantages

  • Darkens mortar and enhances stone
  • Resists water and oil based stains
  • Minimises efflorescence
  • UV stable
  • Non-film forming, breathable Water based
  • Low VOC
  • Can be applied to damp substrates
  • Re-coatable to achieve desired effect

Typical Data

  • Appearance: Milky liquid
  • Specific Gravity: ~1 g/ml at 20 degC pH value: 5 – 7
  • Solubility in water: Dispersible
  • Flash point: Not flammable
  • Shelf life: 1 year in unopened containers under 25 degC
  • Coverage Rate: 2 – 25 m2/L depending on surface porosity

Application

The surface to be treated should be clean and free of all contaminants. The surface can be damp or wet, however SilaSeal Enhance should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application.
Do not apply SilaSeal Enhance if rain is expected within 24 hours of application.
Do not apply if extreme weather conditions are expected.
Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application.
SilaSeal Enhance is ready to apply and should be mixed well before use. A test prior to application must be performed to assess the suitability of the product. SilaSeal Enhance may be applied using a saturated brush, roller, paint pad or a low-pressure hand sprayer. The surface should be uniformly applied to saturation point. Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying. If applied to smooth or non textured surfaces, the surface must be wiped or buffed dry to remove excess.
Additional coats of SilaSeal Enhance may be applied to achieve the desired effect. For recoat, the sealer can be applied as per the first coat. Ensure uniform coverage and removal of excess sealer before drying. Any overspray on adjacent surfaces such as glass, metal or painted surfaces should be wiped clean with a damp rag before the sealer dries.
Full curing may take up to 3 days.
Avoid traffic for at least 24 hours.
Equipment clean up can be performed with water.

SilaSeal Enhance - Water Based Penetrating Sealer SilaSeal Enhance - Water Based Penetrating Sealer SilaSeal Enhance - Water Based Penetrating Sealer SilaSeal Enhance - Water Based Penetrating Sealer
SilaSeal Enhance - Water Based Penetrating Sealer
SilaSeal Enhance - Water Based Penetrating Sealer
SilaSeal Enhance - Water Based Penetrating Sealer
SilaSeal Enhance - Water Based Penetrating Sealer

SilaSeal Enhance - Water Based Penetrating Sealer

$90.00

Size

5L 20L
Download Silaseal Enhance PDF
Coverage Rates

Sealers

FluoroSeal – Water Based Penetrative Sealer FluoroSeal – Water Based Penetrative Sealer
FluoroSeal – Water Based Penetrative Sealer $115.00
SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System Buy 4 x 5L Concentrate and Save $134! FluoroSeal is a water based fluoropolymer sealer used for sealing porous surfaces including natural stone, clay and concrete surfaces. Suitable for garages, walls, entertaining areas, kitchens and wet areas, pool surrounds, patios, driveways.  Key advantages Superior oil and water repellence, providing excellent stain resistance Reduces water ingress and minimises efflorescence in mineral substrates Transparent, natural finish - does not significantly change appearance High penetration into masonry surfaces High wear resistance, UV stable, long life Fungal and algal resistance Easy to clean surfaces Substrates remain breathable Can be applied to damp or wet substrates Read the product information before application. The surface to be treated should be clean and free of all contaminants. The surface can be damp or wet, however FluoroSeal should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application. Do not apply FluoroSeal if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application. FluoroSeal is ready to apply and should be mixed well before use. A test prior to application must be performed to assess the suitability of the product. FluoroSeal is best applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point. Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying. Protect adjacent surfaces such as glass, metal or painted surfaces from any overspray. Full curing may take up to 24 hours. Avoid traffic for at least 24 hours. Equipment clean up can be performed with water.  
SilaSeal Enhance - Water Based Penetrating Sealer SilaSeal Enhance - Water Based Penetrating Sealer
SilaSeal Enhance - Water Based Penetrating Sealer $90.00
SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System SilaSeal Enhance is a ready to apply enhancer for aggregate and honed concrete and concrete pavers. Darkens mortar and enhances stone in aggregate concrete based materials Provides superior water repellence and oil repellence Reduces efflorescence High wear resistance, long life UV stable Water based Non-film forming, allows breathability Fungal and algal resistance Does not peel or blister Can be applied to a damp/wet surface Suitable on both horizontal and vertical surfaces Can be spray applied SilaSeal Enhance is a ready to apply, and enhancer for aggregate concrete and concrete pavers Read the product information before application. The surface to be treated should be clean and free of all contaminants. The surface can be damp or wet, however SilaSeal Enhance should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application. Do not apply SilaSeal Enhance if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application. SilaSeal Enhance is ready to apply and should be mixed well before use. A test prior to application must be performed to assess the suitability of the product. SilaSeal Enhance may be spray applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point.  For dense and non-textured surfaces such as honed concrete and natural stone, sealer can be sprayed, then  buffed using a microfibre mop. Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying. Protect adjacent surfaces such as glass, metal or painted surfaces from any overspray. Full curing may take up to 24 hours. Avoid traffic for at least 24 hours. Equipment clean up can be performed with water.
sale
SilaSeal – Water Based Penetrative Sealer SilaSeal – Water Based Penetrative Sealer
SilaSeal – Water Based Penetrative Sealer $75.00 $880.00
SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System Buy 4 x 5L Concentrate and Save $88! SilaSeal is a water based silane-siloxane sealer used for sealing porous reconstituted and natural stone, clay and concrete materials. Suitable for garages, walls, roofs, entertaining areas, kitchens and wet areas, pool surrounds, patios, driveways. Not recommended for use on very dense substrates. Key advantages Superior water repellence, providing excellent water based stain resistance Reduces water ingress and minimises efflorescence in mineral substrates Transparent, natural finish - does not significantly change appearance High penetration into masonry surfaces High wear resistance, UV stable, long life Fungal and algal resistance Easy to clean surfaces Substrates remain breathable Can be applied to damp or wet substrates Read the product information before application. The surface to be treated should be clean and free of all contaminants. The surface can be damp or wet, however SilaSeal should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application. Do not apply SilaSeal if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application. SilaSeal is ready to apply and should be mixed well before use. A test prior to application must be performed to assess the suitability of the product. SilaSeal is best applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point. Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying. Protect adjacent surfaces such as glass, metal or painted surfaces from any overspray. Full curing may take up to 24 hours. Avoid traffic for at least 24 hours. Equipment clean up can be performed with water.  
sale
KMSi Seal – Water Based Penetrative Sealer KMSi Seal – Water Based Penetrative Sealer
KMSi Seal – Water Based Penetrative Sealer $65.00 $784.00
SAME DAY CLEAN & SEAL - 1 FLOOD COAT APPLICATION - Penetrating Sealer System KMSi Seal is a water based siliconate sealer, used for sealing all types of porous limestone and concrete building materials. Suitable for limestone and concrete retaining walls and plain grey concrete. Not recommended for decorative concrete and other coloured materials. Key advantages Superior water repellence, providing excellent water based stain resistance Reduces water ingress and minimises efflorescence in mineral substrates Transparent, natural finish - does not significantly change appearance High penetration into masonry surfaces High wear resistance, UV stable, long life Fungal and algal resistance Easy to clean surfaces Substrates remain breathable Can be applied to damp or wet substrates Read the product information before application. The surface to be treated should be clean and free of all contaminants. The surface can be damp or wet, however KMSi Seal should not be applied to a surface that has pools of water. The pools should be removed using a broom or cloth prior to application. Do not apply KMSi Seal if rain is expected within 24 hours of application. Do not apply if extreme weather conditions are expected. Do not apply if surface temperatures are above 30 degC. If necessary, cool the surface with water prior to application. KMSi Seal is ready to apply and should be mixed well before use. A test prior to application must be performed to assess the suitability of the product. KMSi Seal is best applied using a low-pressure sprayer. The surface should be uniformly applied to saturation point. Do not allow pooling of sealer. Pools can be spread out using a soft bristled broom. Excess sealer must be removed before drying. Protect adjacent surfaces such as glass, metal or painted surfaces from any overspray. Full curing may take up to 24 hours. Avoid traffic for at least 24 hours. Equipment clean up can be performed with water.
Show more

Designed and developed by BoosterTheme™